LE-1000
- Enclosure conforms to IP68 (7m / 72 hrs) with explosion protection.
- Self-locking drive system.
- DC motor equipped.
- Manual operation can be applied in case of power outage.
- Built-in thermal protection prevents motor burnout.
Control：
- Standard：Modulating
- Options：On/Off-Floating
Conduit entrance :
- Standard: 1/2 ” NPT
- Optional: 3/4” NPT、M20、M25
Hazardous Area Enclosures
ATEX European Hazardous Area
| Directive | Group | Ambient Temperature |
|---|---|---|
| ATEX II 2 GD | Ex db IIB T4 Gb | -30°C to +70°C (-22°F to +158°F) |
| ATEX II 2 GD | Ex tb IIIC T130°C Db | -30°C to +70°C (-22°F to +158°F) |
Standards：IEC 60079-0, IEC 60079-1, IEC60079-31
IECEx International Hazardous Area
| Group | Ambient Temperature | |
|---|---|---|
| Ex db IIB T4 Gb | -30°C to +70°C (-22°F to +158°F) | |
| Ex tb IIIC T130°C Db | -30°C to +70°C (-22°F to +158°F) | |
Standards：EN60079-0, EN60079-1, EN60079-31
North American Hazardous Area-CSA
Zone System
| National Conformity | Class | Zone | Protection Method | Groups | T-Code | Standard Temperature |
|---|---|---|---|---|---|---|
| AEx / Ex | I | 1 | db | IIB, IIA | T4 | -30°C ~ +70°C (-22°F ~ +158°F) |
| AEx / Ex | II | 21 | tb | IIIC, IIIB, IIIA | T130°C | -30°C ~ +70°C (-22°F ~ +158°F) |
Standards：CAN/CSA-C22.2 No. 0-20, CAN/CSA-C22.2 No. 60079-0, CAN/CSA-C22.2 No. 60079-1, CAN/CSA-C22.2 No. 60079-31, UL 60079-0, UL 60079-1, UL 60079-31
- CSA Zone system
- TS
- IECEx
- ATEX
- CNEX
Space heater
A space heater can increase the internal temperature and keep dry inside actuator to avoid the freezing lubricant and moisture causing actuator failure under low temperature or high humidity. Heater is not recommended if the ambient temperature is above 35 degrees℃ (95 degrees℉). However, when the temperature varies much from day to night or between summer and winter, heater and thermostat (25±5 degrees℃ / 77±41 degrees℉) are recommended.
Heater thermostat
The option can switch the heater off when the temperature inside the actuator is over 25°C / 77°F.
Floating controller
An external switch is applied to provide either two-position or floating control to the actuator.
Floating（LE250~LE500）
The picture is based on AC 110/220V.
Floating controller
An external switch is applied to provide either two-position or floating control to the actuator.
Floating（LE1000~LE2000）
The picture is based on AC 110/220V.
❶ Thrust (kg)
- 250, 500, 1000, 2000
❷ Voltage
- D24 – 24V DC; 24 – 24V AC
- 110 – 110V AC; 120 –120V AC
- 220 – 220V AC; 240 – 240V AC
❸ Control Method
- M –Modulating
- F –On/Off-Floating
