Product Name : S-1300 spring return electric actuators
Description
Torque: 130 Nm / 1150 in-lb
Standard Unit Weight: 57 kg / 126 lb
Weight of S-1300 with Optional Manual Override: 77 kg / 170 lb
Mounting Flange: ISO 5211 F10

Standard Features

  • Duty rating: 50% duty cycle at -40℃ to 40℃ and 30% duty cycle at 41℃ to 65℃. 
  • ON-OFF (Two-position) control.

Operating Condition

  • Ambient Temperature: Standard: -30℃ to +65℃ (-22℉ to +149℉), Optional: -40℃ to +65℃ (-40℉ to +149℉)
  • Relative Humidity: 30% to 95% 

Enclosure

  • IP68 (7m, 72 hrs), NEMA 4X / 5
  • Dry powder coated aluminum alloy

Lubrication

  • Gear trains have been already lubricated sufficiently with High-Temp grease at the factory.

Position Indication

  • Visual mechanical position indicator.

Power Supply voltages 

  • AC/DC 24V (NOT available with floating or modulating control)
  • AC 110V, 220V-1 Phase
  • AC 220V, 380V, 440V-3 Phase (NOT available with floating or modulating control)

Conduit Entry 

  • Standard:2 x 1/2" NPT
  • Optional:2 x 3/4" NPT, 2 x M20
h3>
Model TorqueMotor
Power
(W)
WeightMounting Interface
Nmin-lb Standard  With Manual Override Flange  Output Drive  Output  Drive Depth 
KglbKglbISO 5211mminchmminch
S-500 50 445 50 27 60 37 82 F07 17 0.669 30 1.181
S-1300 130 1150 130 57 126 77 170 F10 22 0.866 41 1.614
S-2000 200 1770 130 93 205 131.5 290 F12 27 1.062 45 1.772
S-2600 260 2300 130 95 210 133.5 295 F12 27 1.062 45 1.772
S-3600 360 3185 130 103 228 152 336 F12 36 1.417 46 1.811
  • CE
  • CSA
  • SIL

proimages/product/S/SH13S01B-en-2023-Jul.jpg

Space heater

A space heater can increase the internal temperature and keep dry inside actuator to avoid the freezing lubricant and moisture causing actuator failure under low temperature or high humidity. Heater is not recommended if the ambient temperature is above 35℃/95℉. However, when the temperature varies much from day to night or between summer and winter, heater and thermostat (25±5℃/77±9℉) are recommended.

proimages/加熱器.png

Heater thermostat

The option can switch the heater off when the temperature inside the actuator is over 25±5°C (77±9°F).

Additional limit switches

The standard model equips with the 1st & 2nd switches for fully-open and fully-closed. The option consists of the 3rd & 4th auxiliary switches which provide dry contacts for fully-open and fully-closed.

S500 S1300-S2600

Floating controller

The actuator can be controlled by external controller to open, close and stop at any position between 0 and 90 degree and will fail clockwise to the end position on loss of power. (Based on the standard running direction that the actuator fails clockwise on loss of power.)

The picture is based on AC 110/220V

Modulating controller

Actuator can be operated according to input signal and provide the output signal for feedback.

Input signal:4-20mA,1-5V,2-10V

Output signal:4-20mA,2-10V

The picture is based on AC 110/220V

Operating direction

Standard : Fail clockwise on loss of power.

Optional : Fail counter-clockwise on loss of power.

proimages/options/s500-3600-1-e.jpg

Manual override

proimages/options/s500-3600-2-e.jpg

Thermal insulation blanket

The thermal insulation blanket allows actuator capable of operation after exposure to high temperatures for a significant period of time. Its jacket design makes removal and reinstallation easy.

Working conditions :
Exposure to 250°C (482°F) for 2 hours.
Exposure to 300°C (572°F) for 1 hour.
Exposure to 400°C (752°F) for 2 hours.

Applicable for S-500, S1300, S2000, S2600-110-120Vac / 220-240Vac, on/off (two-position) control

您有最新消息